Two Core Fire Alarm Cable 1.5mm is designed to resist the spread of fire into a new area. Fire-resistant or fire-rated cables are designed to maintain circuit integrity and continue to work for a specified period of time under defined conditions.

We supply and install fire-rated alarm cable, which conforms to (UL) 758 and ISO 9001 Standard.
Two core, 100m per roll.

Fire Alarm Sounder and Strobe Light is powered by a 24v electrical circuit. In the event of a fire, the sounder will sound and flash at the same time. Very stable and reliable; easy to install and wire; can be used in different emergency situations.

1. Adopt the two-wire or the four-wire system wiring method

2. The mainline end receives two main lines, No polarization

3. Connect the power end to a DC24V power line.
Conventional Fire Alarm Sounder and Strobe Technical parameters:
operating voltage: dc20v~28v
working current: 100ma~150ma
flash intensity: ≥1.2ws flash period: ≤1.5s
temperature range: -10oc ~ +50oc
humidity range: 0%~95%rh
sound pressure level: ≥100db
life of flashlight: ≥40000

Asenware Battery Powered Smoke Detector is a photo-detector that uses the most advanced optical sensing chamber. It is designed to provide open area protection without wiring, and it is easy to install and construct.

Asenware Battery Powered Smoke Detector specifications:-
Operating Voltage:- 9VDC(with battery)
Operating Current:- Monitoring Status <= 8uA, alarm status<= 20mA Temprature:- -10 Degree Celcius ~ 55 Degree celcius Relative humidity:- <= 95% non condensing Protection class: IP20 Application: Indoor use only Smoke Alarm Sensitivity:- 0.18 to 0.26 dBM Alarm level: >= 85dB@3m and >= 93dB@1m
Materials and colors:- ABS, white

8 Zone Asenware Fire alarm control panel Specification:-

It is modularized design, the panel can expend from 1 zone to 32 zones easily.
It has 2 level control mode by a lock
It has 24VDC and 5VDC power supply output.
It has FIRE and FAULT signal output.
It has 2 general sounders output.
Each zone has 1 circuit detectors input .
Each zone can be disable by a button.
It has RESET button to reset the panel.
It has SILENCE button to stop BUZZER and SOUNDERS.
It has EVACUATE button to start a manual fire alarm immediately.
It has battery low protection function, when battery voltage lower than 21VDC, battery will be cut off automatically until the mains power is on.
It has an optional GSM module for fire alarm by SMS .

4 Zone Asenware Conventional Fire Panel Features:-

Item – 4 Zone Panel

Model No. – AW-CFP2166-4

Mains Supply Voltage – 110VAC or 240VAC

Internal Power Supply – 27.2VDC

Total Output Current – 3A @ 240VAC

Batteries (Default Conf) – 12V 2AH * 2 = 24VDC in Total

End of Line Device – 6.8kOhms. 5% tolerance, 0.25W (color code – blue,grey,red,gold)

Dimensions(mm) – 395*502*124mm

Weight – 7KG

Weight(with batteries) – 9.6KG